
Re: [Chrysler300] torqueflite trans.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] torqueflite trans.
- From: "Steve Galezowski" <stevenlulu@xxxx>
- Date: Tue, 3 Jun 2003 21:18:55 -0400
I believe it depends on how the transmission is set up which in turn depends
on your motor's torque curve & rpm capability and your axle ratio. If you
have a stock 413 with a 3.23? rear gear, then you wouldn't want it to
downshift over 70 mph or you are likely to overrev the motor.
Steve Galezowski
----- Original Message -----
From: "thomas powers" <classiccars64@xxxx>
To: <chrysler300@xxxxxxxxxxxxxxx>
Sent: Tuesday, June 03, 2003 9:07 PM
Subject: [Chrysler300] torqueflite trans.
>
> Hello.
> I have a question what speeds can a torqueflite transmission
downshift
> cause i was going 60 or 70 m.p.h. in my 60 300F and a car tried to pass
me
> when he was way back to start with then i hit the gas and it would not
> downshift so i could get ahead and the car eventually got right by me and
> passed me.But it would not have happened if the transmission would have
went
> into passing gear whats wrong thank you tom.
>
> _________________________________________________________________
> STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> http://join.msn.com/?page=features/junkmail
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Back to the Home of the Forward Look Network
Archive Sitemap