Re: [Chrysler300] starter drive

From: "Warren R Anderson" <wranderson@xxxx>
Date: Tue, 10 Dec 2002 11:03:09 -0700




>With the starter on our C freshly rebuilt, it's now strong enough to cause
the Bendix drive overrun clutch to slip. Sometimes takes several tries to
get it to catch and crank the engine. Local suppliers can't get one.
Anyone have a good spare drive assembly or know of a potential source?
>
>Park Waldrop
>Atlanta


You didn't mention which local suppliers but NAPA out of Atlanta lists one
in my book for a '57; Balkamp 656-1097.

Also, have you checked the condition of the teeth on the ring gear?

Follow-Ups:
- Re: [Chrysler300] starter drive
  - From: Park Waldrop

Prev by Date: starter drive
Next by Date: [no subject]
Previous by thread: starter drive
Next by thread: Re: [Chrysler300] starter drive
Index(es):
- Date
- Thread

Back to the Home of the Forward Look Network Archive Sitemap

Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.