Fwd: [Chrysler300] over heating 392

["PaddyCaddy ." <paddycaddy@xxxx>]

you might also want to try using a radiator cap that less pounds of 
pressure.

Sean.




> From: "David Zakarian" <arshog@xxxx>
> To: "Chrysler Club" <Chrysler300@xxxxxxxxxxxxxxx>
> Subject: [Chrysler300] over heating 392
> Date: Sat, 31 Aug 2002 11:56:32 -0700
>
> The next mystery. When running the hemi it overheats.
> 1) radiator has new core
> 2) with radiator cap off, water seems to be circulating(looking in the 
> fill hole)
> 3) with cap on and run for a while(20 minutes), it overheats and when the 
> cap is removed it spouts water out the fill hole like a stuck thermostat(no 
> thermostat in the goose neck at this time so that can not be it).
> 4)when the petcock on the radiator is open and running water in the 
> radiator engine cools down right away.
>
> seem to me I'm down to the cap or fan clutch but I don't know if either 
> would cause these symptoms, any other good suggestions?
>
> Zak
>
>
> [Non-text portions of this message have been removed]




_________________________________________________________________
Join the world?s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com