Re: [Chrysler300] 300L Rocker Panels

["Steve Galezowski" <stevenlulu@xxxx>]

My apologies to those who responded to my rocker panel question. I was
confused. In fact, it is the rear rocker panel seams that are filled on my
car and not the front seams! Thanks to Ryan for straightening me out.

Steve

----- Original Message -----
From: "Ryan Hill" <ryan_hillc300@xxxx>
To: <steveg@xxxx>
Sent: Tuesday, August 13, 2002 1:53 PM
Subject: Re: [Chrysler300] 300L Rocker Panels


>
>
> Steve, I'm a little confused about your question......the seems between
the
> front fender and your rockers are filled but the rear (at the bottom rear
> corner of your doors) aren't? sounds like your car has the reverse of what
> the factory did. This is how they should be, the factory used lead to fill
> the seem at the rear of the rocker panel where it joins the quarter panel
> but did not fill the gap between the front fender and the rocker panel.
>
> I attempted to send you some pictures of my car but my scanner isn't
> behaving. I have extensive pictures of my '65 as I dismantled it if you
need
> any more info. It was a rust-free California car with relatively low
milage
> so most of the car was in very original condition. Sounds like your car
has
> some pretty extensive rust if you are replacing the rockers. I wouldn't
mind
> seeing some pictures if you have some.
>
> Ryan Hill
>
>
>
>
>
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx
>