Re: [Chrysler300] 64 camshaft help, please

[<fabe7445@xxxx>]

Call the folks at Comp Cams, 901-795-2400. They are very helpful. Helped me work out a streetable cam for a 340 six pack without a high buck stall converter.
Have your torque converter info for him and your rear end ratio.

Jim F> 
> From: greektruck@xxxx
> Date: 2002/06/21 Fri PM 01:06:50 EDT
> To: Chrysler300@xxxxxxxxxxxxxxx
> Subject: [Chrysler300] 64 camshaft help, please
> 
> hello ya'll. can somebody tell me please, i have a 64 300k short runner long 
> tube rams, 390 hp version.. i am going to replace the 413 with a 440 or a 
> 500. i am going to retain the manifolds but know the cam must be the same 
> duration to work with the rams. i read the response for the G, thats the type 
> of amswer i am hoping for, i need to custom order this, and i know a 108 is 
> cool, a 470 lift is good on computer, but what duration .050 and adv., the 
> lobe centerline?. HELP!!!!!!!!!!!!! i know -4 at crank also. so grind 
> straight up. and use 3 keyway gear set. please help me with this asap. i 
> cannot find definate answers and time is so close. THANK yOU
> 
> p.s. i am going to use edelbrock heads
> 
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 
>