300D parts needed

[John Hertog <crossram@xxxx>]

Hi to all,

Please help with the following "parts needed" list. It's for one of our
Swedish members, Dan Hagen. Should anyone have any of this stuff, I will
gladly write you a check myself, and you can either ship it to me, or bring
it to the Kentucky meet.

I have posted pictures of relevant pages from parts manual at:
http://www.chrysler300club.com/jhstuff/hagen/needs.html ; Please click on
this link to view the exact parts needed. Also a couple pictures of Dan's
car...
==================================================

1/ Heater housing model 705 in excellent condition

2/ Chrome bezel on front seat's RIGHT (passenger) side

3/ Brace, bracket and lock for hood latch assembly. Illustration #'s
provided from parts manual:
a/ Lock is the latch itself ( 15-11-3
b/ Brace is the long vertical piece that goes downwards from latch ( 15-11-7
c/ Bracket is triangular piece ( 7-16-35

4/ throttle linkage rods:
a/ rod that goes from pivot on firewall to carburetor
b/ rod that goes from pivot on firewall down to transmission ( kickdown)

5/ Chrome bezel around driver's door power window switches - OR - complete 4
gang p/w switch assembly

6/ Retainer assembly to wiring harness grommet - this is the METAL piece
that fits around the rubber "plug" located on firewall, where wiring harness
goes through it.

=======================================================================

Again, please HELP with these parts ! Danny's doing a beautiful and serious
restoration on his 300D and needs our help !

John