Re: [Chrysler300] Fuel pump pushrod question

["Bob Merritt Simplex Mfg" <bob@xxxxxxxxxxxxx>]

A fuel pump push rod in good condition for these 413s should measure 3.221"
or close thereto.

R



----- Original Message ----- 
From: "John Hertog" <crossram@xxxxxxxxxxxxx>
To: "Chrysler 300 Club Listverver" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Wednesday, May 19, 2004 3:05 PM
Subject: [Chrysler300] Fuel pump pushrod question


> Hi ...
> Forwarding to the list as per Al's request.  Please either respond to him
> via the listserver, or privately at mavannice@xxxxx .  Looks like Al has
> been separated from his cars for too long...
> John
>
>
> ----- Original Message ----- 
> From: "M. A. VANNICE" <mavannice@xxxxx>
>
> > Hello Fellow Members,
> >     I was intrigued by the recent brief discussion about changing a fuel
> pump
> > and checking the pushrod.  One of my Fs seems to literally "run out of
> > gas" after an extended period of acceleration, such as on a drag strip,
> > and does not have the high-speed performance that I would expect.  What
> > is the probability that the pushrod for the fuel pump is worn and
> > therefore insufficient gas is being pumped under high loads?  What is
> > the exact length of this rod?  Are replacements readily available?  Once
> > I return from Spain, I hope to look into this further.  Thanks for any
> > input.
> > Best regards,
> > Al
> >
> >
> >
> >
>
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
> Yahoo! Groups Links
>
>
>
>




To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
     Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/