[Chrysler300] Digest Number 724

[<Chrysler300@xxxxxxxxxxxxxxx>]

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
Printer at Myinks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/8LmulB/TM
---------------------------------------------------------------------~->

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm 

To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


------------------------------------------------------------------------

There are 5 messages in this issue.

Topics in this digest:

      1. Reproduction ball & trunion parts
           From: "Jess" <jdmiklas@xxxxxxx>
      2. Re: Reproduction ball & trunion parts
           From: "Park Waldrop" <pwald@xxxxxxxxxxxxxx>
      3. Heat Pipes
           From: "Don Cole" <Mr300K@xxxxxxxxxxxx>
      4. speedo gears
           From: Lindsey Fuller <lfuller@xxxxxxx>
      5. Re: speedo gears
           From: "Roger Schaaf" <obiwan10@xxxxxxxxxxx>


________________________________________________________________________
________________________________________________________________________

Message: 1
   Date: Thu, 21 Aug 2003 16:53:55 -0400
   From: "Jess" <jdmiklas@xxxxxxx>
Subject: Reproduction ball & trunion parts

At the MOPAR NATIONALS this past week,  Mancini Racing had some pre
production ball and trunion parts.
The Max Wedge cars use the same parts as some 300s and Mancinis is
reproducing cpmplete rebuild kits. They are not available yet but said
they would be soon.

Call Mancini Racing direct @ 586/294-6670 or
 
www.manciniracing.com

Jeff Miklas


[Non-text portions of this message have been removed]



________________________________________________________________________
________________________________________________________________________

Message: 2
   Date: Thu, 21 Aug 2003 17:36:53 -0400
   From: "Park Waldrop" <pwald@xxxxxxxxxxxxxx>
Subject: Re: Reproduction ball & trunion parts

All be aware that Kanter Auto Parts in NJ has complete rebuild kits,
including the outer housing which is often what wears.

Park Waldrop
C cpe - Atlanta



________________________________________________________________________
________________________________________________________________________

Message: 3
   Date: Thu, 21 Aug 2003 18:03:56 -0400
   From: "Don Cole" <Mr300K@xxxxxxxxxxxx>
Subject: Heat Pipes

To all club members:
I want to thank those of you that have ordered and received the
reproduction heat inlet and outlet pipes for your J's and RAM K's. I have
only a few sets left and those of you who wish to purchase a set please
send in your checks as soon as possible.  I spoke to the company that made
them for me and was told that if I wanted more pipes they would cost more
due to production increases. If I have any sets left I will bring them to
the meet in Dayton. If you act soon and send a check, I'll deliver to
Dayton and you can save the S & H!
300kly,
Don Cole

ps: In case you forgot the cost is $250.00 +$20.00 S&H.


[Non-text portions of this message have been removed]



________________________________________________________________________
________________________________________________________________________

Message: 4
   Date: Thu, 21 Aug 2003 20:26:38 -0500
   From: Lindsey Fuller <lfuller@xxxxxxx>
Subject: speedo gears

anyone coming to dayton (or anyone else) have 20 & 21 tooth gears for a 
'62 trans that's in my F? I have the new coker ww radials on the car 
with a 3.31 rear end. my mechanic figures either of those gears will 
correct the error. email me privately. thanks.



________________________________________________________________________
________________________________________________________________________

Message: 5
   Date: Thu, 21 Aug 2003 21:34:09 -0700
   From: "Roger Schaaf" <obiwan10@xxxxxxxxxxx>
Subject: Re: speedo gears

Keep us posted on how these Coker's work out for you.
----- Original Message ----- 
From: "Lindsey Fuller" <lfuller@xxxxxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Thursday, August 21, 2003 6:26 PM
Subject: [Chrysler300] speedo gears


> anyone coming to dayton (or anyone else) have 20 & 21 tooth gears for a
> '62 trans that's in my F? I have the new coker ww radials on the car
> with a 3.31 rear end. my mechanic figures either of those gears will
> correct the error. email me privately. thanks.
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>




________________________________________________________________________
________________________________________________________________________



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

<<attachment: winmail.dat>>