Re: {Chrysler 300} Brake Issue

On Thu, Jul 30, 2026, 4:51 PM Zach Hietsch <zhietsch@xxxxxxxxx> wrote:

Hello All,

Took my 300B out for the first time to a car show tonight since I got the car driving last year.

On my way home I encountered a brake issue. The pedal got really stiff(like I could only move it 1" without exerting alot of effort) and the car became sluggish under acceleration. When I got it in the garage at home a puff of white smoke came out of the right front and all four wheels were hot to the touch.

I have converted the car to front discs(I didn't throw anything away, relax) and I haven't encountered this issue before. I had a really good pedal on my 15min drive out to the show and then about 10 minutes on my way home.

I have never driven a car without boosted brakes so I am unsure if it's a booster/vacuum issue. Could it be that the push rod for the master isn't adjusted right and its not letting the brakes release fully. When I installed the master it seemed to go all the way back to where it needed to be.

Any insight would be greatly appreciated.

--
Thanks
Zach Hietsch

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAH16hEWANpSZWsOb4Ji4HFpMMdY-dsA6Sz7eg0967ih4DbLB6g%40mail.gmail.com.