Re: {Chrysler 300} Rubber hood rest

["'Andy Mikonis' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Good luck with your search, but don’t expect it to solve the issue. The hood vibration was commented on in at least one magazine road test when they were new.

AM

On Jul 30, 2026, at 5:47 PM, Allan Zolis <allanzolis@xxxxxxxxx> wrote:

Hi Everyone,

I am looking for one rubber hood rest for my 1961 300 G (pictured below). These are the small pieces that the hood rests on when closed. There should be four, but I only have three, which causes the hood to "rumble" while driving.

Please let me know if you have one available or know where I might find it.
<rubber bumper hood 300 G.jfif>
Thanks,
Allan Zolis

Odessa, Florida
allanzolis@xxxxxxxxx

941-447-0925

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAJkpSTXP4jzWmzO2Dgz47bTR3YwBC8wo9C20_BRSdBUWFf9V7w%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/DE299AC7-1D29-4B0E-A43A-00842059A740%40yahoo.com.