Re: {Chrysler 300} The Plastic Bellcrank Throttle Clip

On Mon, Jul 13, 2026, 2:59 PM John Grady <jkg@xxxxxxxxxxxxxxxxx> wrote:

Hi, we are looking at making those, on purpose thicker,will snap in better and more axial bearing on shaft. They were too thin as mopar made them , long wise, imho.
Had prototype this AM, using test material, awaiting nylon for printer . May use something better ., has to snap in without breaking
More shortly ...
Made more K grill clips too. Shortly on FL parts.
J

On Mon, Jul 13, 2026 at 8:12 AM John Nowosacki <jsnowosacki@xxxxxxxxx> wrote:
Can't really tell for sure, but in the picture it looks much thicker than the ones on my cars. I think it may be a reproduction/3D printed modern version? As always, YMMV.

On Mon, Jul 13, 2026 at 6:32 AM Finsruskw@xxxxxxxxxxxxxxx <finsruskw@xxxxxxxxxxxxxxx> wrote:
If it is indeed NOS, it's probably very brittle by now and apt to break when installing it.
buyer beware!

From: "John Nowosacki" <jsnowosacki@xxxxxxxxx>
To: "Finsruskw@xxxxxxxxxxxxxxx" <finsruskw@xxxxxxxxxxxxxxx>
Cc: "Matt Allyn" <allynentertainment@xxxxxxxxx>, "Jeff Biltz" <jrbiltz@xxxxxxxxxxx>, "Nick Taylor" <nicksgaragesd@xxxxxxxxx>, "Bob Jasinski" <rpjasin@xxxxxxxxxxx>, "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Monday, July 13, 2026 6:17:20 AM
Subject: Re: {Chrysler 300} The Plastic Bellcrank Throttle Clip

found this on ebay
https://www.ebay.com/itm/406442162427

On Sun, Jul 12, 2026 at 5:34 PM Finsruskw@xxxxxxxxxxxxxxx <finsruskw@xxxxxxxxxxxxxxx> wrote:
A bit of research in the parts books will tell you that info.
Find the original part number for whatever model you are researching.
Then run it through the numerical lists at the end of each years book that you suspect that application applies to.
That will tell you the years that used them.
Then look up the number in the fuel section of those books to find the models that used them.

From: "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
To: "John Nowosacki" <jsnowosacki@xxxxxxxxx>
Cc: "Jeff Biltz" <jrbiltz@xxxxxxxxxxx>, "Nick Taylor" <nicksgaragesd@xxxxxxxxx>, "Bob Jasinski" <rpjasin@xxxxxxxxxxx>, "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, July 12, 2026 1:37:55 PM
Subject: Re: {Chrysler 300} The Plastic Bellcrank Throttle Clip

Working on it 😁

Matt Allyn

On Jul 12, 2026, at 6:23 AM, John Nowosacki <jsnowosacki@xxxxxxxxx> wrote:

Like many other things, I think 60-64 cars use them across the board. Seems like there should have been an aftermarket for them since they're so often used and pretty much almost a 'normal wear' item.
Looks like something that should be easy to have 3D printed (by someone who knows how). ;-)

On Sun, Jul 12, 2026 at 7:12 AM Jeff Biltz <jrbiltz@xxxxxxxxxxx> wrote:

My 64 K uses them as well. A royal pain in the elbow!

Get Outlook for iOS

From: 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, 12 July 2026 02:55:54
To: Nick Taylor <nicksgaragesd@xxxxxxxxx>
Cc: Bob Jasinski <rpjasin@xxxxxxxxxxx>; Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} The Plastic Bellcrank Throttle Clip

Thanks all.
I am interested in gathering all Years, Makes & Models that use those same plastic clips.

Thanks!

Matt Allyn

On Jul 11, 2026, at 9:57 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

Michael Van Der Veen's 1961 Belvedere 318 uses this same thing. I don't know if his 1961 Dodge Dart Phoenix 383 uses one.

On Sat, Jul 11, 2026 at 4:19 PM 'Bob Jasinski' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

My G uses one of these clips, is it different than ’62-’63?

Bob J

From: 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Saturday, July 11, 2026 3:07 PM
To: Club Chrysler <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} The Plastic Bellcrank Throttle Clip

Do we know details on this little sucker….?

- What years it was used on (I have it on my 1962’s)

- What models it was used on

- Part Number per year (Is it P/N 667 774 for 1962 and 1963?)

<image001.jpg>

Thanks!

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/487D650E-E1FF-4259-815E-53AA6FBC5B28%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/03c901dd118b%24c8213a10%245863ae30%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFOZXH%2BRc30h5u9ByeG3iJsLh6C7MQi_G42MbFC4NAZiFg%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/3DDEBDB5-A92B-4228-938F-47187447B891%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/BN9PR11MB54334419194600A6E0D63C39BEFB2%40BN9PR11MB5433.namprd11.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/A1A006A4-F227-4874-92C8-17C0D520BAC0%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD%2B8cnumhu3%2By-n5Vm5ifo9DJyXeur7ZsLaj8i5HLkWLTHkQUw%40mail.gmail.com.

--

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD%2B8cntAuVFHCygj__A54nwv%2BARKstc8OLaVQn_917SmNiT7cA%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CABZ1P2BHbS_mgBwKvdj_1Z%3DpSEahJi9w%2B18YtfZYFTw0AcDp9w%40mail.gmail.com.