You guys need to get with Don Petty on this. My car is not an H, but has the H manifold and carb setup. The choke and manifold was not right and Don made me a manifold that is correct out of one off another car that had the spot to drill and tap for the fitting, but it was not there. My numbers are wrong but visually its identical. He seemed to be an expert on this subject.
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of Anthony Doughty <62red300h@xxxxxxxxx>
Sent: Thursday, July 2, 2026 1:37:07 PM
To: Matt Allyn <allynentertainment@xxxxxxxxx>
Cc: bill grieve <kirbydink@xxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300H exhaust manifold casting #'s
Thanks Matt. Interesting that we now have 3 different numbers associated with the left side!
Tony Doughty
From: Matt Allyn <allynentertainment@xxxxxxxxx>
Sent: Thursday, July 2, 2026 4:19 AM
To: Anthony Doughty <62red300h@xxxxxxxxx>
Cc: bill grieve <kirbydink@xxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300H exhaust manifold casting #'s
I’m sure your unrestored 300H is all correct.
I cannot find part #2205 586 in the 1962 parts book, though, which is weird.
To confirm what I see in the 1962 parts book:
- 2268 250 is what I see for the Right Side for the “Engine with 2 four barrel carburetors”
- 1739 600 is what I see for the Left Side for the “SD3”
On Jun 29, 2026, at 6:43 AM, Anthony Doughty <62red300h@xxxxxxxxx> wrote:
On my unrestored 300H coupe, the right side is the 2268-250, same as Matt's, but the left side is 2205586. Anyone out there in 300ville know what's correct or why there might be a discrepancy?
I'd attach the photos here but BaT has some way of making it impossible for me to copy them.
From: 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, June 28, 2026 6:18 PM
To: bill grieve <kirbydink@xxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300H exhaust manifold casting #'s
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit
https://groups.google.com/d/msgid/chrysler-300-club-international/SA1PR07MB97642B0FF1FB5728D5E9633BF4F52%40SA1PR07MB9764.namprd07.prod.outlook.com.
Back to the Home of the Forward Look Network
Archive Sitemap