RE: {Chrysler 300} Rebuilt or Replacement Torque Converter 1957 C
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} Rebuilt or Replacement Torque Converter 1957 C



Does  the fluid pour out of the oil filler tube  when you start the car after the 3 days of non operation? Or does it slowly come out over time?

 

Mine would pour out fluid from the oil filler tube when I started it after some days of non operation

What I did to stop this was put a rubber plug at the at top of the dip stick & has not leaked  since

Not sure if the dip sticks had a rubber plug from the factory or not but mine did not have  the rubber plug

Below is a picture of it now ↓

-

 

Larry

San Rafael, CA

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Gary Gettleman
Sent: Tuesday, June 23, 2026 10:39 AM
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Rebuilt or Replacement Torque Converter 1957 C

 

Anyone out there in the wonderful world of Letter Car Land have a suggestion on where/how to find a torque converter that will not bleed down fluid to the cast iron torqueflight.

 

On my 3rd rebuilt transmission which performs as it should, but after 2-3 days parked will puke tranny fluid under the car.

 

Understand this was a problem when new.

 

All thoughts and suggestions will be appreciated.

 

   Thanks 

 

     gary gettleman 

Santa Cruz, Ca

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACN-kqOez0U-cncrpZDFXFg_Mscv%2BgceuL01di2va37mvWsvUg%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/!%26!AAAAAAAAAAAuAAAAAAAAAF79BAeNNBZMnuZ5nfhqxlEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAACi7My1/d6xQLJHuZ%2BBSvRRAQAAAAA%3D%40yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.