{Chrysler 300} Re: 1962 Heater Core Housing Gasket

["'Matt Allyn' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

PS - Also wondering about:

- Round (foam) gaskets that slide onto the Heater Core Inlet & Outlet Pipes - before one slides it into the fiberglass housing

- Pair of Hard Plastic Grommets with their locking Posts that retain the Core into the fiberglass housing

Thanks!

Matt Allyn

On May 9, 2026, at 9:02 PM, Matt Allyn <allynentertainment@xxxxxxxxx> wrote:

Seeking a replacement gasket that is applied AFTER you install the Heater Core into its Housing Box.

Does anyone know if this item from Quirey is correct for the:

Heater Core Fiberglass Housing to the rest of the Air Box?

#464 on page 23

Reads: ’59 - ’64 A/C Heater Set (3 seals)

Thanks!

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/9BA8A7B5-E219-4135-AF3B-4E66EEE281E6%40yahoo.com.