| 300 Sport 2-Door Drivers Rear Quarter Window….
-- Not gliding up & down as it should. Needs help, via hand, up & down. Pulled off panel. Pulled off motor & gear. Cleaned out gear housing. Motor spins freely in both directions out of car. Cleaned hard plastic rollers & tracks of old white lithium grease & dirt. Well as much as one can without pulling the tracks out of the car. Put all back together. Not much change. Questions…. - Do I need to pull the tracks and REALLY clean them out? - If the motor spins freely out of car, do I need to test the motor any other way, for weakness? - Do the hard plastic rollers actually rotate up & down? - (An image of the top roller is attached - should it spin with a finger or is it designed to just glide up & down the track?) - Preferred grease (not white lithium) to use on window tracks? Thanks!  Matt Allyn
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/23C6D5E1-EED5-4282-8B73-7E56FC036B9B%40yahoo.com. |
Back to the Home of the Forward Look Network
Archive Sitemap