RE: {Chrysler 300} 300G Disc brakes

["dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx" <dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx>]

Mike-

You will no doubt find folks who say they converted an F or G to disks and are happy. I am not among them. Pedal travel will be too long, master cylinder selection severely limited by booster and right carb. I hated it. I had it on my F and removed it last year, back to stock drums. 

 

There is no technical reason to convert. The G brakes, stock, are fine in good condition. 

-----Original Message-----
From: "Mike Spencer" <mikespencer377@xxxxxxxxx>
Sent: Thursday, February 5, 2026 11:58am
To: "Club International Chrysler" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 300G Disc brakes

Has anyone installed the full disc conversion from Andy Bernbaum? I’m considering converting my G during restoration.

Thanks,

Mike S

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAPaVs-cQp%2BN5KERofnnwvuKJtPcQ8Xh%2BZJh8dkV8knq7Tw0Mpg%40mail.gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1770312728.83953439%40apps.rackspace.com.