Re: {Chrysler 300} 300G Dyno - Part II @ Nicks Garage

[Tom Wilburn <tomwilburn1@xxxxxxxxx>]

I was thinking that the aftermarket headers may have somehow messed things up. They never told us he had a different cam in it!

Sent from my iPhone

On Feb 2, 2026, at 9:26 PM, Kurt Brueske <kurt.brueske@xxxxxxxxx> wrote:



Hi Tom -

Part III is likely a near future episode…Part I was posted not too long ago.  Despite not having the 375hp, sure sounded good approaching 5K rpm!

Kurt

On Mon, Feb 2, 2026 at 8:15 PM Tom Wilburn <tomwilburn1@xxxxxxxxx> wrote:

Is the next episode available?  Did the factory cam yield 375HP?

Sent from my iPhone

On Feb 2, 2026, at 7:29 PM, Kurt Brueske <kurt.brueske@xxxxxxxxx> wrote:

Neat episode!

https://youtu.be/HW6gY-pI3LI

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/dc38b875-2b87-4116-9d09-863d463f8987n%40googlegroups.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/C151EB49-92DF-4506-A6B7-84CFA28931A6%40gmail.com.