Re: {Chrysler 300} clampage

McMaster Carr has every size needed. Years ago I was selling full sets for 57/58 Chryslers. They are sold in 25 to 50 pc. packs. I don’t know where they are made, This would be a good project for Club Store. Each member with different model could provide count for each. The size repeats for every 300, fuel , oil cooler, vacuum, heater, upper and lower rad hoses.

Gary The Parts Doc

From: John Nowosacki

Sent: Wednesday, January 07, 2026 12:05 PM

To: 300 Club

Subject: {Chrysler 300} clampage

Does anyone have a good recommendation for made in USA Corbin clamps for radiator hoses and such?

It seems the newer versions of the 'worm type' screw style clamps aren't what they used to be and either 'skip' if tightened the least bit too much, or somehow loosen or stretch over time (or maybe it's just me?)

I've heard some bad stories about modern Corbin clamps made of chinesium not being the right size or strength and how they sometimes snap rather than spring when installing them?

I have a local junkyard with many old cars in it. Thought about scavenging under hoods to see if there are any good oldies there I can grab.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD%2B8cnthhAiLP5Rb8j5E39S1P23sR%2BBObCoeOy8v-yHghOOcTA%40mail.gmail.com.