Re: {Chrysler 300} 1958 kickdown lever to linkage bush

[John Grady <jkg@xxxxxxxxxxxxxxxxx>]

Even nylon fails , why stock one is gone it was nylon . You can buy brass oilite bushings , probably .25 + ID for that check od too , then a thin washer on each side so it is like a spool . 

Another way is make one like top hat of brass or aluminum if you have a machine shop friend , once set up easy to make it 

? a good project for club reproduction , make 50 -75? of them every 300 needs this , and you often see cobbled up repairs or rubber grommets.

On Jan 5, 2026, at 9:44 PM, 'Dave Mihalko' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

I think rubber will not work.  Needs to be nylon.  Let me look into it

Dave

Sent from my iPhone

On Jan 5, 2026, at 9:41 PM, Michael Van der veen <michaelvanderveen8@xxxxxxxxx> wrote:



These are the pictures 

<1000017741.jpg>

On Tue, Jan 6, 2026, 1:22 PM Michael Van der veen <michaelvanderveen8@xxxxxxxxx> wrote:

Hi all

I'm looking for a suitable rubber bush to put in the kickdown lever on the transmission where the linkage attaches. Does anyone have a part found that might do the job? Let me know 

Mike

In Australia. 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAPtwmMFW5Ve6JVshNqq7ygDC_K%3Dm-DJdzHV815EOee86p%2BtpeQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAPtwmMEDHHR44E9vBTwhrQJeddxw4wL31U_7%3DaXEbs-fxnWz3w%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/931E90E4-4016-4F1E-B861-A71E0956CDD2%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/B66DB7AC-CBEB-460C-8843-9597A530BBA7%40gradyresearch.com.