Re: {Chrysler 300} 1962 - Headlight Question

[John Grady <jkg@xxxxxxxxxxxxxxxxx>]

ez to trace wire at headlight foot switch , red or black is hi or low , you have power there if one works Can check again at front red/ black   terminal 

Guess ; plug not seated at foot switch , crimp connection inside plug corroded apart ( dampness at floor) or , remotely , bad foot switch .     

good luck !

J 

On Dec 20, 2025, at 12:38 PM, 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

This is weird….

After replacing the front clip, after a wreck….

The headlights are fine in Low Beam mode….

When stepping on the Headlight Dimmer Switch, to flip it into High Beam mode….

The headlights completely go out; all of them.

I have checked all connections at the bulbs and that checks out.

Could this be a weird wiring issue at the Dimmer Switch?

Though I don’t recall that being touched in the wreck fix job.

Thanks!

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/53722DC7-69CE-4996-AFAF-C1721ED6362E%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/C18699BD-DE14-46FE-9083-3F8E55B282AC%40gradyresearch.com.