{Chrysler 300} Vacuum on my 300 F
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Vacuum on my 300 F



Hello,

I’ve been working to make my 300 F run as bad as I possibly can and I think Ives succeeded. The car has never really had a smooth idle, so I replaced the plugs, cap, condenser, plug wires and points. Re-gapped the points to .017 and the plugs to.035. When I check the volume at idle with the car properly timed, I’m pulling 10psi off the passenger side vacuum port. That seems a bit low to me. Brake booster is holding vacuum and I have replaced all vacuum hoses. I’m running out of ideas.
Jay Williamson
Sent from my iPad

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/206BF324-123D-4597-9DB7-F1D7210B2103%40icloud.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.