Re: {Chrysler 300} We don't have

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

This 1974 article on the 300H by Gil Cunningham is an interesting read. Being much closer to the time of when these were "just used cars".

https://www.chrysler300club.com/stories/gilh/h.html

On Fri, Jun 20, 2025 at 5:16 AM Bob Merritt <bob@xxxxxxxxxxxxx> wrote:

As far as I can tell,

we don't have much on the 405 horse ram option H.

I came across something that says the H short rams

are shorter than the J short rams. Really?

Short short rams, I've never heard of that.

Other questions come to mind:

Did it have a special cam?

What did they do for exhaust manifolds?

How did they get the 11/1 compression ratio?

If this was a dealer installed option, just how much did

they have to change -- seems like an unreasonably big job.


If you have information, please send it to me so I can

assemble an article.

Bob


--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/9947dd6f-959a-43d9-9a3d-7c3b552698b8%40simplexco.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMMmCTQCEun3gFC%3DEJOE6_Cy_%3DDPnRkvo5ZvWgxxD4ZJQ%40mail.gmail.com.