I didn't put any clear on mine. I would say you need to remove the paint from the cones or your gears will never come off again.
Nick
Hello all,
I continue to work on my 300 F and hope to have it ready for this years car season. While the body is out for paint, I am working on the restoration of the hubcaps. I have painted the insets with the Cummins Apex Red paint that was recommended. I would like to put a clear coat over the top to help protect the paint. My question is, would it be correct to use a Matte clear or gloss clear? Just trying to keep as close to the original look as possible.
Thank you
Jay Williamson
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/D8EFFDDB-C9A3-413B-8F7D-410C7F5F5EE8%40icloud.com.
Sent from my iPad
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/D8EFFDDB-C9A3-413B-8F7D-410C7F5F5EE8%40icloud.com.
Back to the Home of the Forward Look Network
Archive Sitemap