{Chrysler 300} Secondary Water Temp Sensor Location on a 413 with A/C

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Has anyone found a good secondary location to drill into the water pump housing to place a second water temperature sensor?

 

I know that the later 440’s used a different housing that had the sensors placed so that you could get it out without having to lift up the A/C. But as far as I can tell the 413 housing have no such boss to be drilled.

 

If anyone has found a good place, I would like to know.

 

I looked into the water neck risers with which take a side mounted sender, but the A/C will not allow for a raiser to be used.

 

Thanks, James

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61712BF3167D8EAE9199622A93DA2%40CY5PR19MB6171.namprd19.prod.outlook.com.