Re: {Chrysler 300} 300K distributor curve chart

[Bob Merritt <bob@xxxxxxxxxxxxx>]

We have a summary of letter car distributors and specifications here

http://www.chrysler300club.com/rcmstuff/lettercardistributors.html

On 3/9/2025 8:31 PM, 'ALLAN POZDOL' via Chrysler 300 Club International wrote:

Has anyone had their distributor restored and blueprinted, and have a curve chart to share? Or a factory chart?

 

I would like to dial this in, as I assume that the factory had a distinct curve in practice to squeeze 360 HP out of a single carb 413 for 1964.

 

The service manual only gives a range of degrees at a set RPM.

 

Thanks!

 

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1568061000.3097892.1741566710939%40connect.xfinity.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/e8d50635-13c7-4d56-b2c6-a5c6bbb52387%40simplexco.com.