Hi all, For 1961 300-G with the A745 3-speed manual transmission. Missing the following parts. Used is fine, but I’m including the part numbers.
Clutch release rod: front end 2200029, rear end 2200028
Spring on rear end 1634508
Release fork return spring 1820211
Also need a clutch release fork seal 2075009
Book says Newport and Dodge/Plymouth V8s are the same, I think through 1964. Attaching a photo of a rod that came off a different transmission that had the same release fork, but the tube end is damaged. Also an illustration of the parts assembled. Other than tailpipes and some consumables, this might be all I need to get the Faubel G going.
Thanks,
Andy
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/0C2B5DCD-B6EA-4B33-B108-762ADB4A1EA0%40yahoo.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/0C2B5DCD-B6EA-4B33-B108-762ADB4A1EA0%40yahoo.com.