Re: {Chrysler 300} 300F starter motor

Here's the mini starter I've used in my 300F and two other 1960s.

https://www.qualitypowerauto.com/catalog.php?item=600&fbclid=IwAR24wVweStZaNs7PyScbDGu6uVa3NW5ARPEgtFKy4xz2OnP2DgoGyRr4rww

Needs a little grinding on the adapter and longer starter cables, but so much nicer than the original.

Install photos - https://photos.app.goo.gl/Bb9NDYboiqD9ivV46

On Wed, Feb 19, 2025, 7:21 AM <henry.schleimer@xxxxxxxxxxxxxxx> wrote:

I have an email from April Maxwell looking for advice about fixing her 300F starter that is going bad here in Australia. I don’t have experience with these so I am asking for some help. Apart from taking it to someone who could fix it (which might be hard to find these days) an aftermarket alternative is probably an easier option. I vaguely recall there may be problems fitting some of these. Here is a link to a local shop with a couple of types. https://www.hemiperformance.com.au/shop/shop-by-category/electrical/starter-motor.html

Are any of these ok to use? If not, any other brands that would work?

Thanks

Henry

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/004e01db82e1%24eb2da050%24c188e0f0%24%40optusnet.com.au.