Re: {Chrysler 300} 300K Felts

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

Good to know I'm, I'm going to need them for mine. 

Did you replace the weather stripping above the windows. I saw a kit somewhere, didn't know if they needed to be cut and glued at the back of the quarter windows. I know the front ends needed gluing on.

On Thu, Jan 16, 2025, 1:33 PM 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Hi Guys,

 

I know a couple of others are working on their 300K’s.  The rear quarter window felts I got from QQD, with the heavy stainless flat bead, does not fit the curve.

 

QQD has asked for a pattern which I will make and mail back to them.

 

Just in case someone is planning on ordering felts, I would hold off for a bit.

 

James.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171421EAFDB3FD4C0F8ABC3931A2%40CY5PR19MB6171.namprd19.prod.outlook.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMe%3D%3Dbe%3D6FHGVxpAvnpozb37%2BHiXAgdq9Rdtbs1P1%2B4TQ%40mail.gmail.com.