{Chrysler 300} Sail Cardboard & insulation 300K

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hi All,

 

Anyone have a good photo of the sail cardboard on a ’64 ?

 

Mine is in parts and I will perhaps make up two new ones. The cut out on mine looks to be missing some small part. See the photo. Let me know if you happen to have a photo of it in place with the headliner out so I can make out the outline or if someone has one that is 100% and has a photo of it.

 

I assume the cardboard was glued to the sail and the light gauze insulation is stuck to the cardboard.

 

I placed dynamat on the sail and therefore I could just glue some ¼ inch or ½ inch closed cell foam over the area in place of the cardboard for the sail.  What have other done in this area?

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617127CA329FCAF908923F3293262%40CY5PR19MB6171.namprd19.prod.outlook.com.

Attachment: 300K_drivers_side_sail_cardboard.jpg
Description: 300K_drivers_side_sail_cardboard.jpg

Attachment: sail_dynamat.jpg
Description: sail_dynamat.jpg