hi I thought all 62 are swb? they took it out between door seam and front wheel . Maybe I am wrong? 300 is swb? quite tricky to think about as engine is in same place re firewall . think about that ! got into it over ? possible headers into 60 ( not made) but made for 62 , ? fit ? ; — they ( TTI ) say nothing about 62 wb ? just “fits 62 “ control arm is therefore farther back in 62 along engine side . Might hit ? where is steering box ? must be same place as 60 61 re firewall or angle of column would change never did get that resolved , only way is buy 62 exhaust and try / modify ? TTI does not know . 62 grouped with “ C body “ — may just be happenstance that headers fit C and 62 , or is 62 a C body ? Maybe someone else looked into this or has 62 and 60-61 in process at same time ? On Nov 16, 2024, at 9:20 PM, 'dave mason' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote: -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CE4A4835-A6DF-423A-BD61-7D3189703A92%40gradyresearch.com. |