Re: {Chrysler 300} Source for hardware?

On Tue, Oct 8, 2024 at 3:15 PM 'Keith Langendorfer' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Folks

Hardware stores don’t seem to carry these 1/4-20x3/4 fender style bolts w/washer and recessed style 7/16 head and Napa only has dark finished bolts as near as I can tell. I stripped and refinished my hood latch components and I’d like to get bolts like these that are silver (maybe Cadmium finish?)

I cleaned these up as best I could and I suppose I could prime and paint them but that, of course, is not a great option.

Thoughts on a source, perhaps online?

Thanks in advance,

Keith

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/5B05AAB3-06A3-41D3-877E-C44C24388713%40yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/5B05AAB3-06A3-41D3-877E-C44C24388713%40yahoo.com.