{Chrysler 300} oil filter housing problem.....

[rob bohuslav <sonoramic413@xxxxxxxxx>]

All,

I figure you are the best to ask....

Just changed oil on my '56 Desoto (330 Hemi), and for some reason, I can not.get the top bolt on the housing, the one you tighten down to stop leaking. In the box, for the new filter, I saw where it came.with the large round gasket for the base of the housing, but nothing for the the 5/8 bolt that tightens down everything. Im not even sure how you would get a gasket, o-ring, seal etc.... around it as the bolt is held in place by a spring, and doesnt seem to come out....at least not easily.

What am I doing wrong????!!!

Thanks.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAGQfsuH1XW7hYHBdTEdazPoF6gFzUKWHLcS_SvacC1z4mTgCZQ%40mail.gmail.com.