Re: {Chrysler 300} Re: 300J/Ram 300K remote booster brake and vacuum lin
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Re: 300J/Ram 300K remote booster brake and vacuum lines.



Jamie,

Thanks for that. I'll probably just make my own. I have to repair the line from the back of the car as a previous owner cut it off under the cowl.

Did the factory line from the rear go all the way to the T or did Chrysler put in an extra section from the original T location to the new one?

Some clear photos would be helpful. I have a couple pictures of the T area and one where I can see the line coming from the master cylinder. The booster I got has lines on it with the parts coming from the engine compartment cut off, so at least I know where they land.

Thanks, Nick

On Wed, Sep 4, 2024 at 7:04 AM 'Jamie Hyde' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
Nick, Inline tube made the 63-64 Ram brake lines from my patterns. The ram car is different as the front Distibution block is farther forward than a non ram car and of course all the little piping going to the remote booster. I heard that they may have lost the patterns, they also made the Ebrake cables as well from my patterns. Our salesperson was let go so I don't have a contact inside the company anymore.


On Monday, September 2, 2024 at 3:57:59 PM UTC-4 Nick Taylor wrote:
Anyone have pictures of the brake and vacuum line routing in the engine compartment for one of these cars? Hopefully with the engine out. Also, something showing the air filter for the booster that is supposed to be under the battery tray.

Someone previously stated that they had new lines made and I can't find that e-mail.

Thanks, Nick

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/effa0bae-7045-48f0-bcd0-78fd267b9f2dn%40googlegroups.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNnxLVwej%3DO4p-uXjtDvahf_eZdzS-aB09%3DX7zPD_%3Dd3w%40mail.gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.