Re: {Chrysler 300} seat spacers

I think someone made plates for C , possibly D that move seat travel back ?

I made several like that , also the C/D floor pan had pans embossed in them

related to that , and power seat or not?

Sorry for memory fog about this , but it was an issue .

Someone in early club made parts … i bought two sets , but forget details

I made similar parts for an few F , seat too close to wheel even all the way back

Also related , some upholsters stuff front seat too high , using early Goers covers , beautiful upholstery job , but your legs don’t fit under steering wheel unless 110 lbs person

We need that number to guide work or you get a big surprise , especially if you are big too !

On Aug 30, 2024, at 12:15 PM, 'ALLAN POZDOL' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

I find that the 62 to 76 A-B-E body MOPARS had used Seat Rail Mounting Pad Spacer Kits. Were these ever used on the C Bodies?

My 64 K didn't' have them, the rails just bolted through the floor, padding and carpet underneath.

With the power seat frames joined together by the pipe up front, I wonder if any distortion in their mounting may affect the performance of the front to rear slides.

I did have to polish out quite a bit of galling in the channels when refurbing / replacing the balls and lubricating the slide rails. Just wondering.

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1784744020.183518.1725034523081%40connect.xfinity.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/52A1F70E-8276-48D5-B5AF-0E8F19D5E8F6%40gradyresearch.com.