Re: {Chrysler 300} Idler arm G needed

[John Nowosacki <jsnowosacki@xxxxxxxxx>]

Once you find one, I'd also recommend finding a Moog K258A idler arm ball bearing kit to put in instead of the rubber bushing.  It has a grease fitting as well, and will last forever.

On Wed, Aug 28, 2024 at 4:51 AM Bob Merritt <bob@xxxxxxxxxxxxx> wrote:

Replies to Richard Osborne at Richard Osborne <reomotorsports1@xxxxxx>

Howdy,

I am in need of an idler arm for my G, ideally one with a good bushing. I will settle for one without a good bushing if the is all that is available.

Please let me know if you might have something available.

Thanks,

Richard Osborne
Columbus, OH

reomototsports1@xxxxxx

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/04763e3d-590a-4ca4-9324-6b87d597a861%40simplexco.com.

 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD%2B8cnt6--2%3Dihn%3DJnDtnH6FbqewFLW_zQ%3DN0ruA3DGu6i7Rhw%40mail.gmail.com.