{Chrysler 300} 1962 Speedometer Cable
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 1962 Speedometer Cable



I went to install my new Speedometer Cable into the back of the Speedometer Head.
The Inner Cable will slide into the Speedometer…..

BUT….
It appears that the Inner Cable tip is TOO long in relation to where a crimped on ferrule lives.
And because of that; the Inner Cable shroud is not allowed to meet the back side of the Speedometer thread area.
And because of that; the Cable cannot be threaded onto the back of the Speedometer.
(Hope that all makes sense)

Seems I may need to have the Cable tip trimmed shorter?
OR
Maybe need to have the crimped ferrule moved forward to lessen the 1” tip length?
If this is the case; anyone know how close to the tip the ferrule should be located?
(Picture below)

Speedo Cable.jpeg

Thanks
Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/29D8A6FC-5F9C-46BD-BF79-5B43E020DA65%40yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.