Re: {Chrysler 300} 1964 300 steering column dust shield
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 1964 300 steering column dust shield



Thanks, I get a lot of engine heat from it not sealing enough, I tried to use rubber glue on the deteriorated torn seal , but it failed.

On Mon, Jun 17, 2024 at 10:25 AM James Douglas <jdd@xxxxxxxxxx> wrote:

I thought that QQD can do it if you send them your old one for the steel frame. I took mine and used a lot of both tube and spray liquid rubber and rebuilt mine.

 

That said, one can get air seepage around the column even when they were new. I know someone who took the metal ring, removed all the rubber, and then had a leather boot made for it with a lace up for the last two inches at the column. They then used some closed cell foam to make a ring around the column and then laced it tight. Seal very well.

 

I may do the same at some time on mine as even after re-working mine, I am still getting some air.

 

James

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Harry Torgeson
Sent: Monday, June 17, 2024 10:02
To: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx) <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 1964 300 steering column dust shield

 

My research has not come up with finding the interior rubber dust shield that is at the base of the steering column at the floor, has anyone found a source?

Thanks  

Harry Torgeson

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAHChH_0avaJGMg-rgcZ0BN1RFNdwg2ami2e%3Dp8AHGK%2B73-HcyA%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAHChH_2_kR-xPW--5hPaDxUBB5kPhCQ-8pSvM3O3ghywaWMTJA%40mail.gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.