RE: {Chrysler 300} A/C Hoses
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} A/C Hoses



Rob,

 

I wanted to circle back and say thank you on the recommendation for the E-Z Clip system.

 

It works very nice, and the only tool cost was the pliers. If someone wanted to make them look less modern, one could wrap the clips with a little closed cell 1/8-inch foam and then slip over a thick wall black heat shrink. I like the fact that with the special pliers one can pop the clip off in a second.

 

My only lesson learned is to make SURE you put the clips on before you slip the hose on the fittings. I did that while checking things. The #10 and the #6 hose came off but the #8 was a bitch to get off.

 

I assume there will be no leaks.

 

Thanks, James.

 

From: Rob Kern <robkern@xxxxxxxxxxxxx>
Sent: Friday, April 19, 2024 10:03
To: James Douglas <jdd@xxxxxxxxxx>
Cc: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} A/C Hoses

 

James,

               I highly recommend the EZ-Clip hose connection system from Vintage Air Products in San Antonio, TX.  I experienced hose leaks for 10 years with the crimp on fittings and had no end of trouble.  Forget the $$$$ that evaporated into the atmosphere with the refrigerant!! I had a totally new  Vintage Air system with additional Old Air Products Dual blower rear trunk mounted unit installed in November, 2023.  I researched the hose fitting set up and hoses with the Vintage technicians and followed their advice and went with the EZ-Clip system! Very easy to install, especially not having to “clock” the hose fitting locations for the various components that require hose connections. The hoses also are barrier type design with less porosity for any refrigerant to permeate.  They offer for purchase the cutting tools for the hoses and the special pliers to apply or release the hose clamps that doubly apply pressure at each hose junction fitting. When fully charged after the 2 day installation process there was no leaks whatsoever!  I have been driving the C now going on 6 months with total satisfaction! Check it out and call tech support at Vintage Air. I think you will be satisfied!  300’ly, Rob Kern (enjoying year round drive time in OK due to this new hose and connection system)



On Apr 19, 2024, at 10:24 AM, Gary <garythepartsdoc@xxxxxxxxxxxx> wrote:

 

James, Try https://www.classicautoair.com/. In the past I bought old a/c parts for my 57. They do make new reproduction hoses. 

 

Garythepartsdoc

 

 

 

From: 'James Douglas' via Chrysler 300 Club International

Sent: Tuesday, April 16, 2024 11:23 AM

To: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx)

Subject: {Chrysler 300} A/C Hoses

 

Anyone have a good source for A/C hoses?  I really do not want to send my old ones out to some company I have never used before. Locally in Northern California I am finding only hose houses that want to use the modern push on fittings and not crimp fittings.

 

Since I am doing a stock A/C with R12, I do not want any possible leaks now or in 10 years.

 

Anyone who has any recommendations, I would like to hear about them.

 

James

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171A96BB92329AF187C836A93082%40CY5PR19MB6171.namprd19.prod.outlook.com.

 

-- 
For archives go to 
http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/chrysler-300-club-international/ED2EFE04192C4296AA1F48262C3C2CFF%40OwnerPC.

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171B20BB578195648B48E9493C02%40CY5PR19MB6171.namprd19.prod.outlook.com.

Attachment: EZ_Clip_Hoses.JPG
Description: EZ_Clip_Hoses.JPG



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.