Re: {Chrysler 300} Bumper Over-riders 1964

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

Right rear. I can pull it off and make a template. On the 63 fronts, they are closer in.

On Thu, May 23, 2024, 8:15 AM Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

64 didn't use them in the front.

On Thu, May 23, 2024, 8:12 AM 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Anyone have a location diagram for the drilling the holes in a 1964 Chrysler for bumper overriders ? Front and rear?

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171FA44331A596CEABCB2B593F42%40CY5PR19MB6171.namprd19.prod.outlook.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNpjNzZsF_t1x6u9tK42DL%2BsHRr5BjzfeLb9B_OV-WM%2Bw%40mail.gmail.com.

Attachment: 20240524_185209.jpg
Description: JPEG image