{Chrysler 300} Re: 1962 - Spark Plug Wires
[
Date Prev
][
Date Next
][
Thread Prev
][Thread Next][
Date Index
][
Thread Index
]
{Chrysler 300} Re: 1962 - Spark Plug Wires
From
: ridgleyracing65 <ridgleyracing65@xxxxxxxxx>
Date
: Sun, 14 Jan 2024 15:49:19 -0800 (PST)
7mm wires were factory fit way up into the 1970s. It was only when the manufacturers began installing full electronic ignition systems did they go to 8mm plug wires.
Dyke Ridgley
On Sunday, January 14, 2024 at 3:38:18 PM UTC-6 Matt Allyn wrote:
Are our ’62 spark plug wire size 7mm OR 8mm?
I think 7mm, but wanted to confirm.
Thanks!
Matt Allyn
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx
.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/a5b113a6-9b71-44c1-a7a3-219d9466e0c7n%40googlegroups.com
.
References
:
{Chrysler 300} 1962 - Spark Plug Wires
From:
'Matt Allyn' via Chrysler 300 Club International
Prev by Date:
Re: {Chrysler 300} 1964 300k convertible Dash
Next by Date:
Re: {Chrysler 300} 300F Engine Dyno Results
Previous by thread:
{Chrysler 300} 1962 - Spark Plug Wires
Index(es):
Date
Thread
Back to the Home of the Forward Look Network
Archive Sitemap