Re: {Chrysler 300} 1964 (1963) Torsion Bars

[msgcot2@xxxxxxxxxxx]

For used ones, try Desert Valley Auto Parts.
                             Stanley Cotler
 
------ Original Message ------
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Sent: Sunday, December 31, 2023 11:44 AM
Subject: {Chrysler 300} 1964 (1963) Torsion Bars
 
I have been hunting for a set of the 606-607 bars for six months without 
luck. I have found one bar but not a set so it does me no good so I did 
not buy it. Yards I have checked with do not have any either including 
Murray.
 
So, I am sending out requests to a couple of manufacturers to see if 
they do them and how much. Firm Feel said they are not currently doing 
custom torsion bars. Makes me wonder if they were doing them in house or 
using someone else that is not doing them right now.
 
In the event that I do find someone to make them;  let me know if you 
are interested and I will let you know.
 
The 1964 RAM as well as the 1964 Towing Package used the 606-607 bars 
which have a 125 foot pound spring rate. This matches the rear leaf 
springs which also had a 125 foot pound spring rate. I had put a set of 
these spring, both front and back, into my old blue 300K with the sway 
bar and the difference in handling was a lot while the ride did not seem 
to change at all. That is why I am heading down that rate hole again.
 
If I find someone, I will let you know.
 
James
 
-- 
For archives go to 
http://www.forwardlook.net/300-archive/search.htm#querylang 
<http://www.forwardlook.net/300-archive/search.htm#querylang>
--- 
You received this message because you are subscribed to the Google 
Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to 
unsubscribe@xxxxxxxxxxxxxxxx">chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx 
<mailto:chrysler-300-club-international+<span class=> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171194CA2EA585ED04350C09363A%40CY5PR19MB6171.namprd19.prod.outlook.com 
<https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171194CA2EA585ED04350C09363A%40CY5PR19MB6171.namprd19.prod.outlook.com?utm_medium=email&utm_source=footer> 
.
 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/bcb28f1.123a.18cc1050ac3.Webtop.124%40optimum.net.