{Chrysler 300} Re: Temp & Fuel gauges
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Re: Temp & Fuel gauges



sounds like no ground on metal or board ground , that plug .. Jump around ground pin to solid ground or solder pins to board 
see posts earlier this year .
Do not leave key on you will burn out gauges , regulator does not work if not grounded puts 12v on 5 v gauges burns them out . Why it pegs . 
Sent from my iPhone

On Dec 30, 2023, at 5:16 PM, Dave Dumais <dave.dumais@xxxxxxxxx> wrote:

Hello and Happy New Year.

I have successfully replaced the 64 speedometer, and it is a working unit.

However, the fuel and temp gauges were also replaced. 


Both gauges peg to left during operation,
And the high beam indicator does not function.

Believing that all elect. connections are correct
Any thoughts or experiences? 

Thanks
Dave D

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/07CAC1B2-A05C-43A6-A40F-B6E1DBA3022B%40gradyresearch.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.