{Chrysler 300} Reproduction Project: 60-61 Patch Panels and 63-64 front repair panels

[Jamie Hyde <jamie.hyde@xxxxxxxxxxxxx>]

These patch panels were made in Canada by club member Jean-Yves Chouinard. They will be stocked and shipped by JY. You will contact JY and he will figure shipping from his location to yours as this varies by distance and the Canadian post. We did this to avoid hiring a broker to “import “ them and adding those costs to the project. You send funds to Gloria and she releases your order to JY.

They will be only be sold in pairs for $325 plus shipping, either two fronts, or two rears, not one side.

We will offer a deal if you buy all four for $600 plus shipping.

They are made from .037” thick steel and painted with etching primer, are about 31 inches long and 12" wide.

I just checked my 64 300, the front panels will work for the 63-64's but not the rear sections, the rears only work for the 60-61's. as the fender angle is different. 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/c6fc3584-4559-4c02-87c5-c3d1883d1357n%40googlegroups.com.