I have read that 1955 Imperial Crown models were 12 volt systems Bob J From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Ron Waters Johnny – Have you tested them off the car ? If they still have issues on the bench, then they need to be rebuilt, correctly this time. If they only have issues when installed, then something is binding in the window assembly. Were they rebuilt with 12V components ? Ron From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of jslayton@xxxxxxxxxx I have a problem that someone out there might be able to solve-------55 Imperial------power windows 6 volt------I currently own 3 6 V cars and have owned many others-----never had any problems with 6V-------the drivers door window is not overly tight-----rolls up or down by hand fine---------pass side even looser-------had both motors rebuilt---------3 wire------can't get them to do anything but spark a little---they work fine with 12 V---------found a pair of NOS correct motors-------still get spark--- but much much stronger ----------?------anyone ever dealt with this------these are 3 wire motors that I have used many times over the years-----so everything is correct------Johnnie -- -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/004201d9d453%24e4a3e2a0%24adeba7e0%24%40comcast.net. |
Back to the Home of the Forward Look Network
Archive Sitemap