{Chrysler 300} RE: 1964 Sill Plates New

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Thank you all for the replies.

 

I wonder if a good masking job and the application of several coats of spray Plastidip to the back side would enhance their performance for daily use?

 

James

 

From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Thursday, July 6, 2023 8:44 PM
To: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx) <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 1964 Sill Plates New

 

Has anyone purchased a set of these new manufacture sill plates?

 

https://www.ebay.com/itm/174977769041

 

Even with the shipping at around $475 one would be hard pressed to get a shop to restore a set for that price. That is assuming they are as good or better than the factory units.

 

James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61710C7C0F630DF4E0AFA15E932DA%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617137EABDF99805B63274B6932DA%40CY5PR19MB6171.namprd19.prod.outlook.com.