Hi James, Call Wildcat Auto Wreckingwildcatmopars.com · ~27.9 mi Open · Closes 4 PM They are a MOPAR Wreaking Yard that has been there for about 40 years. They are located about 30 miles east of Portland, OR. John Chesnutt, Portland From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Hi All, I am sure I can get one from Murray for a handsome price… But I thought I would reach out to folks in the off chance they have a passenger side seat frame electric assembly. My wife with her bad knee is having a little trouble getting in and out of the Chrysler. The 1947 Desoto is a LOT easier to get in and out of with the chair high bench seat. Over the next couple of months, I will be pulling everything out for carpet and the like and that would be a good time to switch over the passenger seat from a manual adjust to a electric. I have not seen too many of them in the cars. One thing I was wondering. Are the actual frame, motors and the like the same and just the chrome control strip is side specific or are the actual frames different side to side on the electric units? Best, James -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/00b501d9a53f%24d82a6500%24887f2f00%24%40gmail.com. |
Back to the Home of the Forward Look Network
Archive Sitemap
