{Chrysler 300} window motor brush

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Anyone every run down a set of brushes for the 63 & 64 window motors?

 

They are about 0.246 by 0.246 and are about ½ inch long. The issue is that have a slot milled town 2 sides.

 

Before I start to hunt, I thought I would ask.

 

James

 

PS. The inside of the motor looked great while the outside looked like crap. That rubber they used just trapped moisture on the outside. Dump design.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171BE169968B84FE032BC13935CA%40CY5PR19MB6171.namprd19.prod.outlook.com.