I have one of those fan shroud complete plus also have an extra half which I believe is the bottom unit but would have to verify that.
It appears to be the same as what is one my
1965 300L ht.
Fern
--Hi Keith, My F has a 22” radiator - a 1965 vintage, based on its part #. I’m guessing it was switched out decades ago when a prior owner started converting it to a/c and pulled its original non-a/c radiator. Looking back at my running list, I bought the fan, clutch and shroud from Murray Park in November 2010. Noel
Sent from my iPhoneOn May 24, 2023, at 5:28 PM, 'Keith Langendorfer' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote: Folks At the Hershey Meet I saw a car that had a fan shroud installed on a 22” radiator. I’m racking my brain as to which car it was on (maybe Jamie’s ram K or Peter P’s ‘61 ram Newport?) but am drawing a blank. Anyway, does anyone know a source? I installed one (two piece) on a ‘65 Coronet with a 22” that I had about 7 years ago and assume it’s the same part but can’t remember the vendor I bought it from. As our K went into Dominick Rinaldi’s shop yesterday for the newly rebuilt (and seriously upgraded) “Killer K” engine , I figured we’d add a shroud at the same time so Any suggestions would be appreciated. Thanks! Keith -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/79CC5C7C-14D7-4E44-B321-AD6FF39AB33D%40yahoo.com.