Re: {Chrysler 300} window parts 300K

[Ray Jones <1970hurst@xxxxxxxxx>]

As I have mentioned before, they are Left and Right.

However, the Right Rear and Left front are the same and the left rear and Right front are also the same.

Of course, that only applies to the motors.

Also, these motors were used over many years and throughout most models. Including 70's and 80s pickup trucks

Literally an off the shelf item for all the designers to use.

Murray Park may have what you want, I sold my "L" to him last year. (419) 448-0293

Plus a LF door, and a box of window motors.

Ray, awaiting Hershey...

On Fri, May 5, 2023 at 2:59 PM 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Hi All,

 

I opened up the passenger door and found another amateur repair job. Not as bad as the driver’s door but still will need a lot of work with a jury rigged mount bypass. No doubt cracked like the other side and many on my other 300K’s over the years.

 

I sent a note to the usual suspects asking for pricing on a good gear unit, the scissor unit and the motor.  What I got was:

 

Window regulator, $175.00

Gear drive assembly, $275.00

Working motor, $200.00.

 

Now I know it has been 25 or more years since I was working on 300K’s but over $600 for the window guts? That just seems a lot and we all know the gear boxes cannot be known to be good at the motor mount boss with a magnaflux inspection for cracks and taking it apart to inspect the gears.

 

At this point I have three options, pay the $600 plus, go out and see what a couple of doors complete may cost, hunt for some NOS parts or…

 

I may well decide to spend the money and have the gear boxes scanned and machined out of billet aluminum to make that problem go away forever.

 

If anyone has a gear box for the drivers’ side door and/or the passenger side door ( I still have not confirmed if the gear boxes are left and right specific or not)  that is in good condition and wants to sell it send me an email.

 

James

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61712C089485F45BEB9FFC4393729%40CY5PR19MB6171.namprd19.prod.outlook.com.

--

Ray Jones. Y'all come on down an see us. Ya hear?

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAD72c-zt6dyoDZYxOB6SgdsXnVPgYiyTTZrN9iU3GSS%2BnDAqcw%40mail.gmail.com.