{Chrysler 300} 300F Power window motor HELP!

[Claudio300F <grisolia11@xxxxxxxxx>]

Hi Group,

The window motor on my driver side was not working and I pulled it out and took it apart and a wire came apart and I soldered it back and bench tested up and down and then it just stopped. Then I checked the gear and it was cracked. Ordered a new one from Forward Parts and my issue is putting the motor and housing back together…What’s the trick to holding those 2 pieces open to fit the motor back in place. I’m going crazy trying.

Suggestions are much appreciated….

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/4485aeea-659a-4456-a57e-594922a0d295n%40googlegroups.com.